Yukon Denali AWD V8-6.2L (2007)
1. Install the fuel feed line to the fuel tank.
2. Remove the cap from the fuel feed port on the fuel tank module.
3. Connect the fuel feed line quick connect fitting at the fuel tank module.
4. Install the fuel feed line to the clip (1) and close the clip.
5. Install the fuel feed line to the retaining feature (2) in the fuel tank.
6. Install the fuel tank.
Fuel Hose/Pipes Replacement - Chassis (1500 Series)
FUEL HOSE/PIPES REPLACEMENT - CHASSIS (1500 SERIES)
REMOVAL PROCEDURE
IMPORTANT: Clean all fuel and evaporative emission (EVAP) lines connections and surrounding areas prior to disconnecting the lines in order to
avoid possible fuel and/or EVAP system contamination.