Yukon Denali AWD V8-6.2L (2007)
orientation of the CVS valve pre-filter, secure the additional tie-strap (2) in order to keep the CVS valve vent hose from slipping down, once
the fuel filler housing has been raised back to its original position.
4. Secure the other tie-strap that was provided on the CVS valve vent hose to the fuel fill pipe.
20. Raise the fuel tank filler pipe housing, and the fuel tank fill pipe back to its original position. Ensure that the CVS valve pre-filter screen openings
are pointing downward as shown.
21. Install the spare tire and wheel assembly.
22. Lower the vehicle.
23. Install the fuel tank filler housing to body TORX(R) screws (1) and retainer (2).
Tighten
Tighten the screws to 2.3 Nm (20 lb in).
24. Use a scan tool to clear any DTCs that may be present.
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer
