Yukon Denali AWD V8-6.2L (2007)
2.
Select Next Available Slot. Follow the on-screen instructions. Simultaneously hold the LOCK and UNLOCK buttons on the keyless entry
transmitter to program.
3.
When all the desired transmitters have been programmed, exit the vehicle and operate the transmitter functions in order to verify correct system
operation.
Programming Remote Keyless Entry Transmitters (Sold Vehicles)
Important:
Make several copies of the programming instructions if required.
Some customers may not bring all of their remote keyless entry transmitters to your dealership for programming. Vehicles are sold with two
transmitters. However, customers have the option to purchase additional transmitters. Ensure that customers understand that all of the transmitters
that are to be recognized by the remote control door lock receiver (RCDLR) must be programmed at one time in order to function properly.
Program the transmitters that the customer provides to you using a scan tool. Inform the customer that all of the remaining transmitters will not
function properly until they are programmed. Customers must program all of their transmitters, including the transmitters programmed at your
dealership, at one time, using the driver information center (DIC) programming method. Inform customers to locate and program their transmitters
using the procedure provided. This procedure is also published in the owner manual.
