Yukon Denali AWD V8-6.2L (2007)
Alternate method: Lower the driver's window and simultaneously press the keyless entry transmitters lock and unlock buttons until a horn chirp
sounds. A horn chirp will sound indicating the learn mode has been enabled.
3.
Place the J-46079 in the "simulate" mode. Follow the tool prompts and program all tour tire positions into the vehicle. A horn single chirp will
follow the programming for each position. A double horn chirp will indicate the learning sequence has been successful. When you have
successfully used the "simulate" mode, the tool will display the simulated sensor IDs and tire pressure for each tire position.
Tip:
The tire pressures displayed by the tool will not agree with the tire pressures displayed by the DIC. This is an anomaly with the tool software and
does not indicate a problem. A double horn chirp after the fourth tire is programmed indicates that the vehicle can learn TPM sensors.
Warranty Information
Warranty claims should not be submitted for incorrect tire pressure sensors found in GM Accessory wheel/tire assemblies. Incorrect sensors assembled
into GM Accessory wheels/tires or aftermarket wheels/tires by GM dealers or other sources are the responsibility of the installer or vehicle owner.
Disclaimer
