Yukon Denali AWD V8-6.2L (2007)
12. Ensure the transmission manual shaft is positioned in mechanical park.
13. Remove the retainer that secures the cable to the bracket.
14. Remove the cable clip on the transfer case, if equipped.
15. Remove the range selector cable end (2) from the transmission range selector lever ball stud (1).
16. Depress the tangs and remove the cable from the bracket.
17. Lower the vehicle and ensure that the steering column shift lever is still in the park position.
Installation Procedure
1. Ensure that the transmission manual shaft lever is in the mechanical park position.
2. Align and install the cable to the bracket.
3. Install the range selector cable end (2) to the transmission range selector lever ball stud (1).
4. Install the cable clip on the transfer case, if equipped.
