Yukon Denali AWD V8-6.2L (2007)
Transmission Speed Sensor: Service and Repair
4L80-E/4L85-E - Automatic Transmission
Input Shaft Speed Sensor Replacement
Input Shaft Speed Sensor Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the input speed sensor electrical connector (2).
3. Remove the input speed sensor bolt.
4. Remove the input speed sensor (1).
5. Inspect the input speed sensor (1) for any evidence of damage.
Installation Procedure
