Yukon Denali AWD V8-6.2L (2007)
Transmission Position Switch/Sensor: Service and Repair
4L80-E/4L85-E - Automatic Transmission
Park/Neutral Position Switch Replacement
Tools Required
J 41364-A Park/Neutral Switch Aligner
Removal Procedure
1. Apply the park brake.
2. Shift the transmission into Neutral.
3. If equipped with 4-wheel drive (4WD), remove the front propeller shaft.
4. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
5. Disconnect the park/neutral position (PNP) switch electrical connector (1).
