Yukon Denali AWD V8-6.2L (2007)
Windshield Washer Reservoir: Service and Repair
WASHER SOLVENT CONTAINER REPLACEMENT
REMOVAL PROCEDURE
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the left front wheel assembly.
3. Remove the left front wheelhouse liner.
4. Disconnect the washer pump hoses (1, 2) from the left side fender flange.
5. Drain the windshield washer solvent into a suitable container.
6. Disconnect the electrical connectors.
7. Lower the vehicle in order to access the hood latch.
8. Open the hood.
9. Remove the windshield washer solvent cap.
