Yukon XL 2500 2WD V8-6.0L VIN N (2006)
4. Using a flat-bladed tool, separate the bond between the sealer and the door.
5. Pull the waterproof sealing tape from the deflector.
6. Remove the water deflector.
Installation Procedure
1. Position the electrical connectors through the water deflector.
2. Using waterproof tape, or 3M(R) 777, or equivalent, install the water deflector to the door.
3. Install the trim panel to the door.
Water Deflector Replacement - Rear Door (Tahoe/Yukon/Escalade)
Water Deflector Replacement - Rear Door (Tahoe/Yukon/Escalade)
Removal Procedure
1. Remove the trim panel.
2. Remove inside door handle.
3. Note location of wiring and remove through deflector.
4. Using a flat-bladed tool, separate the bond between the sealer and the door.
5. Pull the waterproof sealing tape from the deflector.
6. Remove the water deflector.
Installation Procedure
