Yukon XL 2500 2WD V8-6.0L VIN N (2006)
7. Install the console in the vehicle.
8. Connect the wire connectors.
9. Move the console forward in order to install the retaining screws.
10. Install the 2 screws (1).
Tighten the screws to 4 N.m (35 lb in).
11. Install the cupholder to the console.
12. Install the upper console bezel.
13. Install both front seats.
Center Console End Panel Replacement
Center Console End Panel Replacement
Removal Procedure
1. Remove the storage bin.
2. Remove the rear cupholder from the end panel.
3. Remove the 2 retaining screws.
