Yukon XL 2500 2WD V8-6.0L VIN N (2006)
1. Install a NEW fuel tank module seal onto the fuel tank.
2. Position the fuel tank module part way into the fuel tank.
3. Connect the vapor line quick connect fitting (1) to the module.
4. Install the module into the fuel tank.
5. Place the lock ring into position.
6. Using J 45722, rotate the lock ring clockwise in order to lock the ring.
IMPORTANT: Always replace the fuel sender seal when installing the fuel sender assembly. Replace the lock ring if necessary. DO NOT apply any
type of lubrication in the seal groove.
Ensure the lock ring is installed with the correct side facing upward. A correctly installed lock ring will only turn in a clockwise direction.
