Yukon XL 2500 2WD V8-6.0L VIN N (2006)
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the fuel line bracket nuts.
Tighten the bolt to 12 N.m (106 lb in).
3. Install the front fuel tank.
4. If equipped with 4WD, install the fuel hose/pipe clip to the bracket on the transfer case.
5. Install the fuel line clip to the bracket on the automatic transmission.
6. Install the fuel pipe bracket to the bellhousing stud.
7. Install the fuel pipe bracket nut.
Tighten the nut to 10 N.m (89 lb in).
8. Lower the vehicle.
