Yukon XL 2500 2WD V8-6.0L VIN N (2006)
Tie Rod: Service and Repair
Steering Linkage (Non-Rack & Pinion)
Tie Rod Replacement
Tie Rod Replacement
^
Tools Required
-
J 24319-B Universal Steering Linkage Puller
-
J 29194 Steering Linkage Installer-14 mm
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Important: Use the J 24319-B in order to separate all the tie rods and ball joints.
Remove the nut (2) from the outer tie rod ball stud (3).
3. Use the J 24319-B in order to remove the outer tie rod ball stud from the steering knuckle.
4. Important: Do not reuse the nut.
Remove the tie rod end from the shaft by loosening the jam nut.
5. Remove the outer tie rod end from the relay rod.
