Yukon XL 2500 2WD V8-6.0L VIN N (2006)
Stabilizer Bushing: Service and Repair
Front Suspension
Stabilizer Shaft Insulator Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the oil pan skid plate, if equipped.
4. Remove the stabilizer shaft insulator bracket bolts (3).
5. Remove the stabilizer shaft bracket (2).
6. Lower the stabilizer bar to remove the stabilizer shaft insulators (1).
7. Inspect all of the parts for wear and damage.
Installation Procedure
