gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement (8.6 W/O JL4, 9.5, 9.5LD Inch Axles)|Page 10101 > < Rear Axle Shaft Seal and/or Bearing Replacement (8.6 W/O JL4, 9.5, 9.5LD Inch Axles)|Page 10099

Yukon XL 2500 2WD V8-6.0L VIN N (2006)

Page 17
background image

7. Remove the adjusting nut using the J 2222-C .

8. Remove the adjusting nut.

9. Remove the hub from the axle housing.

10. Remove the rotor, if necessary.
11. Remove the oil seal from the wheel hub using a suitable seal removal tool.

12. Remove the inner hub bearing.

Rear Axle Shaft Seal and/or Bearing Replacement (8.6 W/O JL4, 9.5, 9.5LD Inch Axles)|Page 10101 > < Rear Axle Shaft Seal and/or Bearing Replacement (8.6 W/O JL4, 9.5, 9.5LD Inch Axles)|Page 10099