Yukon XL 2500 2WD V8-8.1L VIN G (2004)
Front Bumper Bracket: Service and Repair
Bracket Replacement - Front Bumper (2500)
Bracket Replacement - Front Bumper (2500)
1. Remove all related panels and components.
2. Remove the damaged bumper bracket.
3. Visually inspect the frame and restore all damage to factory specifications using 3-dimensional measuring.
Important: If the vehicle is equipped with tow hooks, discard original fasteners.
4. Align the replacement bracket lower bolt holes with tow hook mounting locations and install the bolts (1) supplied.
5. Align the front edge of bracket with front edge of frame and mark upper bolt locations (1) on frame.
6. Rotate the bracket forward and drill 13 mm (1/2 in) holes in frame at upper bolt locations.
7. Rotate the bracket back into position.
