Yukon XL 2500 2WD V8-8.1L VIN G (2004)
Glove Compartment: Procedures
Glove Compartment Door
DOOR REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT
REMOVAL PROCEDURE
1. Close the I/P compartment door.
2. Drill out the 2 rivets (2).
3. Remove I/P storage compartment door retaining screws (1) from the instrument panel.
4. Remove the I/P compartment door.
INSTALLATION PROCEDURE
1. Install the I/P compartment door.
2. Install the I/P compartment retaining screws (1) to the instrument panel.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 1.9 N.m (17 lb in).
Key and Lock Cylinder Coding
KEY AND LOCK CYLINDER CODING
KEY IDENTIFICATION AND USAGE