Yukon XL 2500 2WD V8-8.1L VIN G (2004)
1. Install the EBCM to the BPMV.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the new EBCM screws (1).
Tighten the screws to 5 Nm (39 inch lbs.) in an X-pattern.
3. Lower the vehicle.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure.
5. Revise the tire calibration using the Scan Tool Tire Size Calibration function.
6. Return to Diagnostic Starting Point - Antilock Brake System.