Yukon XL 2500 2WD V8-8.1L VIN G (2004)
8. Remove the water pump bolts.
9. Remove the water pump.
10. Remove and discard the water pump gaskets.
Installation Procedure
1. Place NEW water pump gaskets into place.
2. Install the water pump.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the water pump bolts.
Tighten the bolts to 50 Nm (37 ft. lbs.).
4. Install the bypass hose.
5. Position the bypass hose clamps at the water pump and water crossover.
