gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine/Chassis (Front)|Page 6954 > < Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine/Chassis (Front)|Page 6952

Yukon XL 2500 2WD V8-8.1L VIN G (2004)

Page 2
background image

INSTALLATION PROCEDURE

1. Install the EVAP lines (1) to the retaining clips.

2. Remove the caps from the EVAP openings.
3. Connect the EVAP lines to the module.
4. Install the rear fuel tank.

Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine/Chassis (Front)|Page 6954 > < Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine/Chassis (Front)|Page 6952