Yukon XL 2500 2WD V8-8.1L VIN G (2004)
Alternator: Service and Repair
Generator Replacement
GENERATOR REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the drive belt.
3. Disconnect the generator electrical connector (1).
4. Remove the generator cable from the generator, perform the following:
-
Slide the boot down revealing the terminal stud.
-
Remove the generator cable nut from the terminal.
-
Remove the generator cable.
5. Remove the generator bolts.
6. Remove the generator.
INSTALLATION PROCEDURE