Yukon XL 2500 2WD V8-8.1L VIN G (2004)
Control Arm: Service and Repair
Rear Suspension
Upper
Rear Axle Upper Control Arm Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Disconnect the electronic suspension control (ESC) sensor, if equipped.
3. Remove the upper control arm retaining nut and bolt from the frame bracket.
4. Remove the upper control arm retaining nut and bolt from the axle bracket.
5. Remove the upper control arm.
Installation Procedure
1. Install the upper control arm.
2. Install the upper control arm retaining bolt and nut to the axle bracket.