Yukon XL 2500 4WD V8-6.0L VIN N (2006)
SPEAKER REPLACEMENT - FRONT DOOR
REMOVAL PROCEDURE
1. Remove the trim panel.
2. Remove the speaker by pushing down on the top retainer.
3. Disconnect the electrical connector.
INSTALLATION PROCEDURE
1. Connect the electrical connector.
2. Install the speaker.Push the speaker into place. Ensure that the speaker is completely seated.
3. Install the trim panel.
4. Inspect the component operation.
Rear Pillar (Utility)
SPEAKER REPLACEMENT - REAR PILLAR (UTILITY)
REMOVAL PROCEDURE
1. Remove the garnish molding.
2. Remove the garnish molding.
3. Remove the speaker.
4. Disconnect the electrical connectors, as necessary.
INSTALLATION PROCEDURE