Yukon XL 2500 4WD V8-6.0L VIN N (2006)
Trunk / Liftgate Striker: Service and Repair
Lock Striker Replacement - Endgate (Tahoe/Yukon)
Lock Striker Replacement - Endgate (Tahoe/Yukon)
Removal Procedure
1. Remove the lower striker bolt.
2. Remove the striker.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the striker.
Tighten the bolts to 22 N.m (16 lb ft).
2. Install the trim panel.