Yukon XL 2500 4WD V8-6.0L VIN N (2006)
9. Install the park brake cable to the equalizer bar by pulling down on the cable in front of the equalizer and installing the cable to the equalizer bar.
10. Install the tire and wheel assembly.
11. Remove the safety stands.
12. Lower vehicle.
13. Adjust the park brake.
(W/ NYS)
Disc Brake Backing Plate Replacement - Rear (15 Series W/NYS)
Caution: Refer to Brake Dust Caution.
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle.
3. Remove the tire and wheel assembly.