Yukon XL 2500 4WD V8-6.0L VIN N (2006)
Parking Brake Shoe: Service and Repair
Park Brake Shoe Replacement (RPO Nys)
Park Brake Shoe Replacement (RPO NYS)
Caution: Refer to Brake Dust Caution.
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle.
3. Remove the tire and wheel assembly.
4. Relieve the tension from the park brake cable by pulling down on the intermediate cable, then release the cable from the equalizer bar.
5. Remove the rear park brake bracket bolt.
6. Remove the park brake cable from the park brake actuator lever.
7. Remove the park brake assembly and backing plate from the steering knuckle.