Yukon XL 2500 4WD V8-6.0L VIN N (2006)
8. Remove the park brake shoe retaining clip bolt and retaining clip.
9. Remove the park brake shoe from the actuator.
Installation Procedure
1. Install the park brake shoe to the actuator.
2. Install the park brake shoe retaining clip and retaining clip bolt.
^
Tighten the bolt to 3 N.m (25 lb in).
Notice: Refer to Fastener Notice.
3. Install the park brake assembly and backing plate to the steering knuckle.
4. Install the park brake cable to the park brake actuator lever.
5. Install the rear park brake bracket bolt.
^
Tighten the bolt to 61 N.m (45 lb ft).
6. Install the park brake cable to the equalizer bar.
7. Adjust the park brake shoe. Refer to Park Brake Adjustment.
