Yukon XL 2500 4WD V8-6.0L VIN N (2006)
Shifter A/T: Service and Repair
Shift Lever Replacement (Without Tow/Haul Switch)
Shift Lever Replacement (Without Tow/Haul Switch)
Removal Procedure
1. Roll back the seal until the TORX(r) head shift lever screw (2) is exposed.
2. Remove the TORX(r) head shift lever screw (2).
3. Remove the shift lever.
Installation Procedure
1. Install the shift lever (1).
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the TORX(r) head shift lever screw (2).
^
Tighten the screw to 20 Nm.
3. Roll the seal over the TORX(r) head shift lever screw (2).