Yukon XL 2500 4WD V8-6.0L VIN U (2005)
REMOVAL PROCEDURE
1. Remove the rear seat.
2. Remove the Third-Pillar trim panel.
3. Remove the garnish molding.
4. Remove the door sill plate.
5. Remove the quarter panel trim screws.
6. Remove the quarter panel trim from the vehicle.
INSTALLATION PROCEDURE
1. Install the quarter panel trim to the vehicle.
2. Install the quarter panel trim screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 2 N.m (18 lb in).
3. Install garnish molding.
4. Install the door sill plate.
5. Install the Third-Pillar trim panel.
6. Install the rear seat.
Trim Panel Replacement - Rear Quarter - Right
TRIM PANEL REPLACEMENT - REAR QUARTER - RIGHT
REMOVAL PROCEDURE
1. Remove the rear seat.
2. Remove the garnish molding.
3. Remove the trim panel.
4. Remove the door sill plate.
5. Remove the quarter panel trim screws.
6. Remove the quarter panel trim from the vehicle.