Yukon XL 2500 4WD V8-6.0L VIN U (2005)
1. Squeeze the cable retainer tabs (2) together.
2. Pull the cable from the seat back latch.
4. Unclip the cable end (1) from the head restraint release mechanism.
5. Remove the cable from the head restraint release mechanism.
1. Squeeze the cable retainer tabs (2) together.
2. Pull the cable from the head restraint release mechanism.
INSTALLATION PROCEDURE
1. Push the cable into the hole in the head restraint release mechanism.
2. Ensure the retainer tabs fully extend to secure the cable to the head restraint mechanism.
3. Clip the cable end onto the head restraint mechanism.