Yukon XL 2500 4WD V8-6.0L VIN U (2005)
3. Remove the following components from the seat cushion frame:
-
The frame springs (1)
-
The frame suspension (2)
-
The plastic retainers (3)
4. Remove the seat cushion frame from the vehicle.
INSTALLATION PROCEDURE
1. Install the following components to the seat cushion frame:
-
The plastic retainers (3)
-
The frame suspension (2)
-
The frame springs (1)
2. Install the seat cushion trim cover and pad.
3. Install the seat trim panel.
4. Re-zero the inflatable restraint passenger presence system. Refer to Passenger Presence System Programming and Setup in Restraint Systems.
Filter Replacement - Front Seat Cushion
FILTER REPLACEMENT - FRONT SEAT CUSHION
REMOVAL PROCEDURE
1. Remove the seat cushion.
2. Remove the filter (2) from the module.
INSTALLATION PROCEDURE