Yukon XL 2500 4WD V8-6.0L VIN U (2005)
1. Install the park brake cable guide to the park brake cable.
2. Install the park brake cable guide.
Notice: Refer to Fastener Notice in Service Precautions.
3. For cutaway vehicles, install the park brake cable guide bolt to the frame.
Tighten the bolt to 18 Nm (13 ft. lbs.).
4. For cargo and passenger vehicles, install the park brake cable guide bolt to the frame.
Tighten the bolt to 13 Nm (115 inch lbs.).
5. Remove the safety stands.
6. Lower the vehicle.
Park Brake Cable Replacement - Front
Park Brake Cable Replacement - Front
Removal Procedure
1. Release the park brake.
2. Remove the park brake pedal. Refer to Park Brake Pedal Assembly Replacement.
