Yukon XL 4WD V8-5.3L (2011)
Lifter / Lash Adjuster: Service and Repair
Valve Lifter Replacement
Valve Lifter Replacement
Removal Procedure
1. Remove the cylinder head and gasket. Refer to Cylinder Head Replacement - Left Side See: Cylinder Head Assembly/Service and
Repair/Cylinder Head Replacement - Left Side
2. Remove the cylinder head and gasket. Refer to Cylinder Head Replacement - Right Side See: Cylinder Head Assembly/Service and
Repair/Cylinder Head Replacement - Right Side.
3. Remove the valve lifter guide bolts (211).
4. Remove the valve lifter guides (210) with the lifters. Note the installed position of the guides. The notched area of the guides is to align with the
locating tab on the engine block.
