Yukon XL 4WD V8-5.3L (2011)
Heat Shield: Service and Repair
Exhaust Manifold Heat Shield Replacement - Left Side
Exhaust Manifold Heat Shield Replacement - Left Side
Removal Procedure
1. Remove the left wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Left Side See: Body and Frame/Fender/Front Fender/Front
Fender Liner/Service and Repair/Front Wheelhouse Liner Replacement - Left Side.
2. Remove the exhaust manifold heat shield bolts and heat shield from the exhaust manifold.
Installation Procedure
Caution: Refer to Fastener Caution See: Service Precautions/Vehicle Damage Warnings/Fastener Caution.
1. Position the exhaust manifold heat shield to the exhaust manifold and install the heat shield bolts and tighten to 9 Nm (80 lb in).