Yukon XL 4WD V8-5.3L (2011)
Fuel Filler Hose: Service and Repair
Fuel Tank Filler Pipe Replacement
Removal Procedure
Note: Clean the fuel connections and surrounding areas prior to disconnecting the lines in order to avoid possible contamination.
1. Remove the fuel fill cap.
2. Remove the fuel tank filler housing to body TORX(R) screws (1) and retainer (2).
3. Remove the spare tire stowage lock cylinder, if necessary.
4. Remove the spare tire, if necessary.
5. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle See: Maintenance/Vehicle Lifting/Service and Repair.
