Yukon XL 4WD V8-5.3L (2011)
Negative: Service and Repair
Battery Negative Cable Replacement
Battery Negative Cable Replacement
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection See: Battery Negative Cable
Disconnection and Connection.
2. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement See: Engine, Cooling and Exhaust/Engine/Tune-up
and Engine Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Resonator Outlet Duct
Replacement.
3. Disconnect the engine harness electrical connector (1) from the battery current sensor.
4. Remove the battery current sensor (3) clip from the battery tray, if equipped with a battery current sensor.
