Yukon XL 4WD V8-6.0L (2007)
1. Remove the air cleaner outlet duct.
2. If the vehicle is equipped with four wheel drive (4WD), remove the front drive axle. Refer to Differential Carrier Assembly Replacement.
3. Lower the vehicle.
4. Remove the generator bracket.
5. Remove the engine mount to frame bolts (1).
6. Raise and support the vehicle halfway. Refer to Lifting and Jacking the Vehicle.
7. Remove the left wheelhouse liner.
Important: DO NOT raise and/or support the engine by the crankshaft balancer, or the oil pan.
8. Place an adjustable (screw type) jack to the tab (1) located on the engine block.
