gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Coolant Temperature Sensor/Switch (For Computer) > < Camshaft Position Sensor Replacement (With RPO Codes LY2/LC9/LY5/LMG)|Page 8332

Yukon XL 4WD V8-6.0L (2007)

Page 3
background image

5. Install the CMP sensor wire harness (737).
6. Connect the CMP sensor wire harness electrical connectors to the CMP sensor and the CMP actuator magnet.

7. NOTE:  Refer to Fastener Notice.

Install the 3 CMP sensor wire harness bolts (738).

Tighten the bolts to 12 N.m (106 lb in).

8. Connect the engine wiring harness electrical connector (1) to the CMP sensor wire harness.
9. Lower the vehicle.

Coolant Temperature Sensor/Switch (For Computer) > < Camshaft Position Sensor Replacement (With RPO Codes LY2/LC9/LY5/LMG)|Page 8332