Yukon XL 4WD V8-6.0L (2007)
![background image](/gmc/yukon_xl_4wd/v8-6.0l/Page-1691058.png)
7. Pressing the J 38125-12A (GM P/N 12094429) tool in the release cavity of the terminal you are removing, gently pull the wire out of the back of
the connector. Always remember never use force when pulling a terminal out of a connector. See the release tool cross reference in the Reference
Guide of the J-38125 to ensure that the correct release tool is used.
TERMINAL REPAIR PROCEDURE
Use the appropriate terminal and crimper in the J-38125 in order to replace the terminal.
Tyco/AMP Connectors (Door Module)
TYCO/AMP CONNECTORS (DOOR MODULE)
TOOLS REQUIRED
J-38125 Terminal Repair Kit
REMOVAL PROCEDURE
Side view of connector.
View of top of connector.
1. Locate the assist lever and lock on the top of the connector.