Yukon XL 4WD V8-6.0L (2007)
12. Install the cover.
Notice: Refer to Fastener Notice.
13. Install 2 NEW screws (1) to the casting.
Tighten the screws to 2 N.m (18 lb in).
14. Install 2 NEW longer screws (2) to the motor cover.
Tighten the screws to 3 N.m (26 lb in).
15. Install the encoder motor.
Shifting Out of Neutral
1. Set the parking brake and apply the regular brake pedal.
2. Shift the transmission to NEUTRAL (N) and turn the ignition to RUN with the engine off.
3. Press the button for the desired transfer case shift position (Two-Wheel High, Four-Wheel High, AUTO 4WD, or Four-Wheel Low). After the
transfer case has shifted out of NEUTRAL the NEUTRAL light will go out.
4. Release the parking brake.