Yukon XL 4WD V8-6.0L (2007)
10. Remove the 2 pivot pins from the steering column tilt head assembly (1) by using J 21854-01.
11. Install the tilt lever into the steering column tilt head assembly (1).
12. Pull back on the tilt lever and at the same time, pull the steering column tilt head assembly (1) down and away from the steering column.
13. Remove the J 42640.
14. Remove the steering column tilt head assembly.
15. Remove the tilt lever.
16. Remove the upper bearing assembly from the steering column tilt head assembly.