Yukon XL Denali 2WD V8-6.2L (2011)
6. Install the timing chain tensioner (232) and bolts (231).
Tighten the bolts to 25 Nm (18 lb ft).
7. Install the camshaft position actuator. Refer to Camshaft Position Actuator Replacement See: Camshaft, Lifters and Push Rods/Camshaft/Service
and Repair/Camshaft Position Actuator Replacement.
8. Remove the J 42386-A (1) and bolts.
9. Install the starter motor. Refer to Starter Replacement See: Starting and Charging/Starting System/Starter Motor/Service and Repair.
10. Install the oil pump. Refer to Oil Pump, Screen, and Crankshaft Oil Deflector Replacement See: Engine Lubrication/Oil Pump/Service and
Repair.