Accord L4-1751cc 1800 EK1 (1982)
PARTS Molding for door lock button opening:
Blue - H/C
1384981
'82
Gray - H/C
1385004
Brown - H/C
1385020
Blue - H/C
1507128
'83
Gray - H/C
1507136
Red
- H/C
1507144
Beige - H/C
1507151
WARRANTY CLAIM INFORMATION For replacing all 4 moldings, use operation number 75864 and a total time of 0.2 hour. (For replacing a door
panel, use operation 75821 and an additional time of 0.3 hour.) On cars beyond 12/12, these operations, like all repairs, are eligible for goodwill
consideration by your District Service Manager. You must request the consideration and get the DSM's decision before starting work.
Technical Service Bulletin # 83008
Date: 830401
Interior - Gap in Door Panel Covering
Model
Applicable To
82 and 83
ACCORD
4-Door
File Under
Bulletin No.
83-008
BODY
Issue Date
APRIL 1983
Gap between Door Panel Covering and Lock Button Molding (Supersedes Bulletin 82-033 dated November 1982)
PROBLEM The vinyl covering on the upper edge of the door panel pulls away from the lock button molding, leaving a gap between the edge of the vinyl
and the edge of the molding.
CORRECTIVE ACTION Install a new molding with wider edges to cover the gap. If one or more doors have a gap between the molding and vinyl,
replace the moldings on all four doors. If a gap is wider than 4 mm, replace the door panel.
1.
Roll the window down so you can work from outside the car.
2.
With both thumbs, push the top edge of the molding down and toward the inside of the car until it pops out. Then lift the molding straight up to
remove it.