honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

A/C Thermostat <--> [Evaporator Temperature Sensor / Switch]|Locations|Page 207 > < A/C Thermostat <--> [Evaporator Temperature Sensor / Switch]|Locations|Page 205
Page 1
background image

A/C Thermostat: Service and Repair

EVAPORATOR REMOVAL 

1. Disconnect the battery negative terminal.
2. Recover the refrigerant.

3. Disconnect the receiver line and suction hose from the evaporator.

CAUTION:  Cap the open fittings immediately to keep moisture and dirt out of the system.

4. Remove the grommets.
5. Remove the glove box and its frame by removing the 5 screws and 1 bolt.

6. Loosen the right sealing band and slide it to the left.

A/C Thermostat <--> [Evaporator Temperature Sensor / Switch]|Locations|Page 207 > < A/C Thermostat <--> [Evaporator Temperature Sensor / Switch]|Locations|Page 205