Accord L4-1829cc 1.8L SOHC ES, ET FI (1985)
Alignment: Service and Repair
Alignment
Toe-In
Ensure tires are properly inflated prior to checking or adjusting toe-in.
1.
Center the steering wheel, then loosen tie rod locknuts.
2.
Turn both tie rods in the same direction until both front wheels are positioned straight ahead.
3.
Adjust toe to specifications by turning both tie rods in the same direction, then tighten tie rod locknuts.
Caster Inspection & Adjustment
Ensure tires are properly inflated prior to checking or adjusting caster angles.
Fig. 1 Caster angle inspection
Caster angle is not adjustable, however, the following procedure may be used to ensure caster is within specifications.
1.
Raise front of vehicle and position turning radius gauges under front wheels, then lower vehicle.
2.
Remove spindle nut and install suitable caster gauge and adapter, Fig. 1.
3.
Apply front brakes and turn wheels 20° inward.
4.
Position caster gauge at 0°, then return wheels to straight-ahead position and note gauge reading. If caster angle is not within specifications,
inspect suspension components for damage and repair as necessary, then recheck caster.
Camber Inspection & Adjustment
Ensure tires are properly inflated prior to checking or adjusting camber angles.
