Accord L4-1829cc 1.8L SOHC ES, ET FI (1985)
Power Steering Valve: Customer Interest
Steering - Power Steering Moan
Model
Applicable To
File Under
Bulletin No.
'84-85
86-016
ACCORD
ALL
STEERING
Issue Date
'84-86
PRELUDE
AUG 29,'86
SYMPTOM
A moaning noise from the power steering rack, usually on hard left turns.
CORRECTIVE ACTION
Replace the power steering control valve with an improved part.
1.
Remove the control valve from the power steering valve body assembly, using the procedure outlined in the Service Manual.
2.
Inspect the control valve carefully to determine its size and replace it with a new valve of the same size.
Control Valve Identification
CONTROL VALVE IDENTIFICATION:
^
Control valves are sized to fit the valve bodies; they come in 3 sizes, marked "X," "Y" and "Z."
^
The original valve will have its identification letter inked in one of three locations. Even if the letter itself is illegible, a trace of ink will indicate
the size by its location on the valve.
^
If all traces of the letter or ink are gone, use a size "Y" valve.
^
If a new valve does not correct the moaning noise or the test drive reveals poor power assist, contact your DSM for authorization for a valve body
assembly replacement.
Bleeding Procedure
BLEEDING PROCEDURE:
After installation of the correct size control valve, use the following procedure to bleed any air from the system:
