Accord L4-1829cc 1.8L SOHC ES, ET FI (1985)
Shift Cable: Adjustments
4 Speed Automatic Transaxle
Fig. 1 Shift cable adjuster assembly
SHIFT CABLE
1.
With engine off, remove console.
2.
Shift to drive, then remove lock pin from cable adjuster, Fig. 1.
3.
Ensure hole in adjuster is perfectly aligned with hole in shift cable.
4.
If holes are not aligned, loosen locknut on shift cable and adjust as necessary.
5.
Tighten locknut, then install lock pin on adjuster. If lock pin binds during installation, cable is still out of adjustment.
6.
Start engine and check shift lever in all gears.