Accord L4-1955cc 2.0L SOHC 2-bbl (1986)
Wheels: Service and Repair
NOTE: For additional information see Tightening Notes. See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Fundamentals and
Basics
CAUTION
Before re-installing the wheels, remove any build up of corrosion on the wheel mounting surface and disc mounting surface by scraping and wire
brushing. Installing wheels without good metal-to-metal contact at the mounting surfaces can cause wheel nuts to loosen. This can lead to a wheel
coming off while the vehicle is moving, possibly causing loss of control.
INSTALL
1. Wheel and tire assembly in position on the hub/rotor, and lug nuts installed loosely.
2. Turn the wheel until one nut is at the top of the bolt circle. Tighten the nut just snug.
3. Snug up the remaining nuts criss-cross to minimize runout.
TIGHTEN
-
Nuts to specification.
-
Tighten evenly and alternately to avoid excessive runout.
