Accord L4-1955cc 2.0L SOHC 2-bbl (1986)
3.
Use an air nozzle to dry the fuel filler and separator pipes. Pay particular attention to the numbered areas shown below.
Note
The pipes must be completely dry for the rust preventive to adhere properly.
4.
Remove the two bolts holding the fuel filler pipe to the frame rail.
5.
Open the fuel filler door and remove the filler cap. Loosen, but do not remove, the three nuts holding the filler pipe to the body. Reinstall the filler
cap.
6.
Examine the filler pipe mounting area in the body. If it has rusted away, or is weakened by rust, install an adapter plate. See Adapter Plate
Installation.
7.
Use a gasket scraper or Exacto knife to remove any loose or flaking pieces of the fuel filler pipe assembly's original black plastic coating. Inspect
those areas for signs of fuel leakage. Replace the fuel filler pipe assembly only if you find signs of perforation or leaking.
