Accord L4-1955cc 2.0L SOHC 2-bbl (1986)
assembly.
NOTICE
Check the color code carefully. The retractor will not work properly if the wrong sensor is installed.
29.
Shake the new sensor unit gently. Make sure the actuator and weight move freely. Do not touch the actuator or the weight.
30.
Place the new sensor in the slot in the retractor assembly. Slide it to the right to lock it in place. Make sure the sensor is against the end of the slot.
Owner Letter 1
Example of the Customer Letter
May 1993
RECALL: 1986-87 Accord Fuel Filler Pipe
Dear Accord Owner:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Honda Motor Co., Ltd. has determined that a defect related to motor vehicle safety exists in the fuel filler pipe of certain 1986-87 Accords. Our records
indicate you may own one of the affected vehicles.
The potential problem is limited to cars that have been driven in a specific geographical area where corrosive road salt is used extensively to aid in snow
and ice control. If the protective coating of the fuel filler and/or separator pipe is damaged, salt water may accumulate between the coating and the steel
filler and/or separator pipes. This accumulation could cause corrosion which could eventually rust through the pipes.
